Course Duration
Days: 1 – 5 (last day for testing)

Attendees
1 – 3

Course Objectives
By the end of the course the operator should be able to:

Compact on inclines.
Site and operate machine safely in response to given tasks.
Recognise defects and hazards that affect road roller motions.
Demonstrate an understanding of responsibilities under relevant legislation.
Demonstrate an understanding of compaction, frequency and amplitude.
Operate machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice.

Course Summary

Compact around radius
Relevant regulations/legislation
Emergency controls
Introduction to machine
Controls and instruments
Limitations of use
Refuelling procedures
Pre-start inspection/maintenance
Set the roller for compaction duties
Manoeuvre in confined areas using forward and reverse direction
Compact different materials to given instructions
Compact up to supported and unsupported edges
Procedures when compacting on inclines
Theory Test Preparation

Certification
Trained Operator Card – Valid for 2 years.

Refresher Period
The Trained Operator Card is not renewable (see follow-on courses below).

Recommended Follow-On Courses
Vocational Qualification (VQ) in Plant Operations (SCQF Level 5) on Road Roller is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card, for this category, can be applied for upon achievement of the relevant VQ. The Competent Operator Card is valid for 5 years and is renewable.