BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Luddon Training - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Luddon Training
X-ORIGINAL-URL:https://luddon.co.uk/training
X-WR-CALDESC:Events for Luddon Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20241027T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260216T080000
DTEND;TZID=Europe/London:20260220T170000
DTSTAMP:20260619T163933
CREATED:20260213T140248Z
LAST-MODIFIED:20260213T140326Z
UID:554-1771228800-1771606800@luddon.co.uk
SUMMARY:Telescopic Handler
DESCRIPTION:Course Duration \nDays: 1 – 5 (last day for testing) \nAttendees \n1 – 3 \nCourse Objectives \nBy the end of the course the operator should be able to: \n\nLoad and unload vehicles.\nCarry out a pre-start inspection.\nLoad and unload loadout towers.\nOperate safely under varying site conditions.\nCarry out minor adjustments and routine service.\nUnderstand the causes of instability of truck and loads.\nSet stabilisers correctly – have machine stable and level.\nDemonstrate an understanding of responsibilities under relevant legislation.\nOperate the machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice.\n\nCourse Summary \n\nLimitations of use\nFork truck stability\nLoad weight assessment\nRelevant regulations/legislation\nIntroduction to machine\nSafe Load Indicator (if fitted)\nPre-start inspection/maintenance\nTheory Test Preparation\nTravel over undulating ground\nLoading onto/off loadout towers\nHill starts\nDriving\nRefuelling procedures\nBulk stacking\nOperator’s safety code\nTravelling on inclines\nControls and instruments\nComponents of lift trucks\nIntroduction to hydraulics\nLoading/unloading vehicles\nHandling various types of loads\nRated capacity charts\n\n  \nCertification \nTrained Operator Card – Valid for 2 years. \nRefresher Period \nThe Trained Operator Card is not renewable (see follow-on courses below). \nRecommended Follow-On Courses \nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on Telescopic Handler is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ.  The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-telehandler-2/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250327T080000
DTEND;TZID=Europe/London:20250327T080000
DTSTAMP:20260619T163933
CREATED:20250311T155632Z
LAST-MODIFIED:20260213T141513Z
UID:283-1743062400-1743062400@luddon.co.uk
SUMMARY:Confined Space
DESCRIPTION:Course Duration \n1 Day \nThe Aim of the Course is to: \nGive training and practical assessment for those persons who need to plan implement and work to safe working procedures and permits for confined space entry. \nCourse Objectives \n  \n\nIdentify any hazards and associated risks involved when entering confined spaces.\nUnderstand the current legislation and codes of practice for confined space entry.\nImplement control measures such as ventilation\, gas detection and monitoring to eliminate and reduce potential risks.\nSelect inspect\, use and store personal protective equipment and site safety equipment.\nUnderstand and work to entry permits and safe working procedures.\nWork with escape breathing apparatus.\nImplement the appropriate accident and emergency procedures.\n\nCourse Summary \nCandidates will participate in theory lessons and practical demonstrations / exercises\, all of which are highlighted by the use of Powerpoint presentation & Videos covering: \n  \n\nHealth and Safety at Work Act 1974\nConfined Spaces Regulations\nProvision and Use of Work Equipment Regulations.\nOther current relevant regulations.\nConfined space hazards and associated risks\nSafe working procedures and entry permits\nGas detection\nUse of escape breathing apparatus\nAccess equipment\, winches and lifelines\nHygiene procedures\nAccident and emergency procedures\nPractical exercises\n\nWho Do We Recommend Attends The Course? \nAll personnel who are directly involved in the planning\, supervision and execution of work in confined spaces such as manholes\, shafts\, chambers\, sewers\, tanks etc. \nCertification \nLuddon Construction Ltd Certificate – Valid for 3 years.
URL:https://luddon.co.uk/training/course/confined-space-2/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Health & Safety
END:VEVENT
END:VCALENDAR