BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Luddon Training - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://luddon.co.uk/training
X-WR-CALDESC:Events for Luddon Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20231029T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20241027T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260223T080000
DTEND;TZID=Europe/London:20260306T170000
DTSTAMP:20260419T052814
CREATED:20240429T131918Z
LAST-MODIFIED:20260213T140702Z
UID:84-1771833600-1772816400@luddon.co.uk
SUMMARY:360 Excavator above and below 10 Tonnes
DESCRIPTION:Course Duration\nDays: 1 – 10 (last day for testing) \nAttendees \n1 – 4\n\nCourse Objectives \nBy the end of the course the operator should be able to: \nSafely use quick hitch\nLift and deposit loads (Endorsement Test Optional)\nCarry out a pre-start inspection\nOperate safely under varying site conditions\nExcavate to various depths and formations and reinstate ground\nCarry out minor adjustments and routine service\nDemonstrate an understanding of responsibilities under relevant legislation\nOperate machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice \nCourse Summary \nRefuelling procedures\nLoading vehicles\nTravelling on inclines\nRelevant regulations/legislation\nTravelling on undulating ground\nLift and move basic slung loads (Endorsement Test Optional)\nPre-start inspections/ maintenance\nForming stock piles\nIntroduction to machine\nControls and instruments\nVarious sizes of excavations\nExcavate to levels\nBack-filling and levelling\nTheory Test Preparation\nCertification\nTrained Operator Card – Valid for 2 years.\nLuddon Construction Ltd Theory and Practical Certificate for in-house courses. \nRefresher Period\nThe Trained Operator Card is not renewable (see follow-on courses below).\n360° Excavator Refresher Course after 3 years for in-house courses. \nRecommended Follow-On Courses\nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on 360° Excavator is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ. The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-360-excavator/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20241001T083000
DTEND;TZID=Europe/London:20241001T120000
DTSTAMP:20260419T052814
CREATED:20240429T133638Z
LAST-MODIFIED:20251215T145347Z
UID:115-1727771400-1727784000@luddon.co.uk
SUMMARY:Abrasive Wheels
DESCRIPTION:Course Duration\nDays: 0.5 \nAttendees\n1 – 8 \nCourse Objectives\nBy the end of the course the delegate should be able to: \nDemonstrate an understanding of responsibilities under relevant legislation.\nSelect and mount appropriate disc/wheel for the work in hand.\nCorrectly use the machine/s.\nDress the wheel.\nCourse Summary \nRelevant regulations/legislation\nIntroduction to the equipment\nPractical use of machine/s\nHand Arm Vibration\nCutting and grinding of various objects with various machines\nHazards and precautions to be observed when using abrasive wheels and cutting discs\nDust suppression\nExamination of abrasive wheels\nMounting of abrasive wheels\nPersonal Protective Equipment\nTypes and functions of wheels and discs\nSelection\, testing and mounting of wheels and discs\nCare\, maintenance\, transport\, handling and storage of wheels and discs\nCertification\nLuddon Construction Ltd Certificate – Valid for 3 years. \nRefresher Period\nAbrasive Wheels / Cutting Discs (Stihl Saws) Refresher Course after 3 years. \nAny Other Relevant Information\nCertification will be issued for various types of machine/s covered during training i.e. hand-held petrol cutter and/or angle grinder etc.
URL:https://luddon.co.uk/training/course/abrasive-wheels/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment,Health & Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260309
DTEND;VALUE=DATE:20260314
DTSTAMP:20260419T052814
CREATED:20250709T133601Z
LAST-MODIFIED:20260303T160129Z
UID:521-1773014400-1773446399@luddon.co.uk
SUMMARY:Ride on Roller
DESCRIPTION:Course Duration\nDays: 1 – 5 (last day for testing) \nAttendees\n1 – 3 \nCourse Objectives\nBy the end of the course the operator should be able to: \nCompact on inclines.\nSite and operate machine safely in response to given tasks.\nRecognise defects and hazards that affect road roller motions.\nDemonstrate an understanding of responsibilities under relevant legislation.\nDemonstrate an understanding of compaction\, frequency and amplitude.\nOperate machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice. \nCourse Summary \nCompact around radius\nRelevant regulations/legislation\nEmergency controls\nIntroduction to machine\nControls and instruments\nLimitations of use\nRefuelling procedures\nPre-start inspection/maintenance\nSet the roller for compaction duties\nManoeuvre in confined areas using forward and reverse direction\nCompact different materials to given instructions\nCompact up to supported and unsupported edges\nProcedures when compacting on inclines\nTheory Test Preparation \nCertification\nTrained Operator Card – Valid for 2 years. \nRefresher Period\nThe Trained Operator Card is not renewable (see follow-on courses below). \nRecommended Follow-On Courses\nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on Road Roller is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ. The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-ride-on-roller-2/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260309
DTEND;VALUE=DATE:20260314
DTSTAMP:20260419T052814
CREATED:20250709T133601Z
LAST-MODIFIED:20260303T160129Z
UID:521-1773014400-1773446399@luddon.co.uk
SUMMARY:Ride on Roller
DESCRIPTION:Course Duration\nDays: 1 – 5 (last day for testing) \nAttendees\n1 – 3 \nCourse Objectives\nBy the end of the course the operator should be able to: \nCompact on inclines.\nSite and operate machine safely in response to given tasks.\nRecognise defects and hazards that affect road roller motions.\nDemonstrate an understanding of responsibilities under relevant legislation.\nDemonstrate an understanding of compaction\, frequency and amplitude.\nOperate machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice. \nCourse Summary \nCompact around radius\nRelevant regulations/legislation\nEmergency controls\nIntroduction to machine\nControls and instruments\nLimitations of use\nRefuelling procedures\nPre-start inspection/maintenance\nSet the roller for compaction duties\nManoeuvre in confined areas using forward and reverse direction\nCompact different materials to given instructions\nCompact up to supported and unsupported edges\nProcedures when compacting on inclines\nTheory Test Preparation \nCertification\nTrained Operator Card – Valid for 2 years. \nRefresher Period\nThe Trained Operator Card is not renewable (see follow-on courses below). \nRecommended Follow-On Courses\nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on Road Roller is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ. The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-ride-on-roller-2/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260316T080000
DTEND;TZID=Europe/London:20260330T170000
DTSTAMP:20260419T052814
CREATED:20240429T131941Z
LAST-MODIFIED:20260213T140816Z
UID:86-1773648000-1774890000@luddon.co.uk
SUMMARY:180 Excavator above and below 5 Tonnes
DESCRIPTION:Course Duration\nDays: 1 – 10 (last day for testing) \nAttendees\n1 – 4\n\nCourse Objectives \nBy the end of the course the operator should be able to:\nSafely use quick hitch.\nLift and deposit loads.\nUse ancillary attachments (forks).\nCarry out a pre-start inspection.\nOperate safely under varying site conditions.\nCarry out minor adjustments and routine service.\nDemonstrate an understanding of responsibilities under relevant legislation.\nExcavate to various depths and formations and reinstate ground.\nOperate machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice \nCourse Summary \nRefuelling procedures\nRoad Traffic Act\nLoading vehicles\nRelevant legislation/regulations\nTravelling on inclines\nLift and move basic slung loads\nDoze\, scrape\, clam and shovel\nConfigure machine for road travel\nForming stock piles\nPre-start inspections/maintenance\nIntroduction to machine\nControls and instruments\nExcavate to levels\nBack-filling and levelling\nTheory Test Preparation\nRepositioning of Backhoe\nCertification\nTrained Operator Card – Valid for 2 years.\n\nRefresher Period\nThe Trained Operator Card is not renewable (see follow-on courses below). \n\nRecommended Follow-On Courses\nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on 180° Excavator is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ. The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-180-excavator/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
END:VCALENDAR