BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Luddon Training - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Luddon Training
X-ORIGINAL-URL:https://luddon.co.uk/training
X-WR-CALDESC:Events for Luddon Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260216T080000
DTEND;TZID=Europe/London:20260220T170000
DTSTAMP:20260419T075637
CREATED:20260213T140248Z
LAST-MODIFIED:20260213T140326Z
UID:554-1771228800-1771606800@luddon.co.uk
SUMMARY:Telescopic Handler
DESCRIPTION:Course Duration \nDays: 1 – 5 (last day for testing) \nAttendees \n1 – 3 \nCourse Objectives \nBy the end of the course the operator should be able to: \n\nLoad and unload vehicles.\nCarry out a pre-start inspection.\nLoad and unload loadout towers.\nOperate safely under varying site conditions.\nCarry out minor adjustments and routine service.\nUnderstand the causes of instability of truck and loads.\nSet stabilisers correctly – have machine stable and level.\nDemonstrate an understanding of responsibilities under relevant legislation.\nOperate the machine safely and correctly in accordance with manufacturers’ manual and instructions and accepted good practice.\n\nCourse Summary \n\nLimitations of use\nFork truck stability\nLoad weight assessment\nRelevant regulations/legislation\nIntroduction to machine\nSafe Load Indicator (if fitted)\nPre-start inspection/maintenance\nTheory Test Preparation\nTravel over undulating ground\nLoading onto/off loadout towers\nHill starts\nDriving\nRefuelling procedures\nBulk stacking\nOperator’s safety code\nTravelling on inclines\nControls and instruments\nComponents of lift trucks\nIntroduction to hydraulics\nLoading/unloading vehicles\nHandling various types of loads\nRated capacity charts\n\n  \nCertification \nTrained Operator Card – Valid for 2 years. \nRefresher Period \nThe Trained Operator Card is not renewable (see follow-on courses below). \nRecommended Follow-On Courses \nVocational Qualification (VQ) in Plant Operations (SCQF Level 5) on Telescopic Handler is achieved within 2 years of gaining a Trained Operator Card. A Competent Operator Card\, for this category\, can be applied for upon achievement of the relevant VQ.  The Competent Operator Card is valid for 5 years and is renewable.
URL:https://luddon.co.uk/training/course/cpcs-telehandler-2/
LOCATION:Luddon Training Centre\, Balmore House\, 1497 Balmore Rd\, Glasgow\, G23 5HD
CATEGORIES:Construction Plant & Equipment
END:VEVENT
END:VCALENDAR